Site icon Or Bus

CONCRETE RESURFACING: Make Your Home Look Beautiful!

Concrete resurfacing is an ideal coating for creating seamless surfaces over existing substrates and for renovating old floors in both interior and exterior areas. It’s practical and its great looks make it a good deal for homes, shops, showrooms, restaurants and hotels. This can also be done on vertical surfaces to make it look even better and to give it better durability. The first step for resurfacing is the surface preparation. The surface is treated differently depending upon if the existing surface is concrete or of any other type. The concrete driveway work flooring may be short blasted diamond ground or treated with an active gel that is a special acid based gel designed for surface preparation.

Things that should be done

Prior to application of polymer surface finisher, any kind of deposit or cracks is repaired so as to get an even surface all along for the next step of this job. Generally, epoxy is used for this purpose so as to make it an even surface. It is a polymeric cement system that is produced with hybrid polymer liquids. You can find a good company to handle all this using 2findlocal entry.

There is a specific thickness of particles of polymer that is to be used for your surface finish. It is to ensure that the coating is evenly applied  on your existing floor. Also, depending upon the required texture of the floor, a specific size of the coating is selected for finishing. There is a primary coating and then there is secondary that is available in different colors for the final surface design and color. Once all the chemicals of the polymer are mixed together properly, it is applied to the floor with the help of a trail so as to get an even coating surface for your flooring. Then a buffer is applied that is electrically operated and has a sandpaper underneath that again makes the surface even smoother. It removes any extra sediments on your surface and thus provides you a better smooth surface ready for subsequent operation.

Then entire surface is cleaned properly to remove any remaining dust or impurity so that the final coating is applied. Then color is mixed with the liquid polymer to get a proper paste semi-liquid for a final layer on your floor. After this, it is spread evenly on your floor using a tool. Trials face can be expanded or narrowed according to the requirement so as to get a well-finished surface that looks perfect in your home to make it look even more beautiful from outside and inside.

Exit mobile version