We love sound effects but sometimes sound become so distracting that it does not allow us to utilize our full potential. That sound becomes noise contributing to a stressful working environment. It is extremely important to stop the sound in its track by taking a few measures so that one can work productively. If you want to know a few ways to reduce sound problems due to temporary sources then this article has got you covered. There can be a high probability that you are living near any nightclub or a construction site and in that case, these few tips mentioned below will help you. The simplest approach to block the path of the sound source which is leading towards your room. You can try the obvious technique like using extra layers of glazing. But this method will only work if you will tightly seal the edges as this will not allow any year gap to pass through. You need to realize that if the air source can get inside your room then a sound can also find its way. You need to completely avoid duct tape or any channel cables as this will provide a path for the sound to pass through. First of all, you need to sort out any part of leaks but this does not solve your problem and heat insulation is different from soundproofing. Bear in mind that your objective is of soundproofing and that is why you need to do than you think.
Absorbing and dampening
Have you ever heard about damping and absorbing basically these two techniques are quite similar but slightly different. This absorbing technique makes use of rubber materials for soaking up any incoming sound signals, so This allows less sound transmission to any of the room. But as far as jumping method is concerned then it makes use of a solid dead wall which does not even pass a vibration. In general, these two techniques can be sensed as making use of extra thick doors for not allowing sound energy to pass through. These techniques make use of heavy double doors which possesses an air gap between them and you already know that air is a great insulator.
Heavy Concrete wall
Many people also make use of several other techniques to keep sound out of their building. By making use of heavy concrete walls, the reducing intensity of sound transmission but the sound still travel through floors and the ceilings. If you really want to eliminate the sound then you have to take care of the ceilings and floor as well. These heavy concrete walls are not portable noise wall.
Decoupling and portable noise wall
Many people also go for decoupling technique which is making a room within a room. The sound of the outer room does not pass through the inner room and this makes it completely soundproof. But there are certain rules in which the construction of these rooms take place. These two rooms are made from very heavy and solid materials with the point in mind that these should not be touching each other, else the sound transmission will be possible. One can also avail the idea of portable noise wall to reduce overall noise.